Programme Dishwasher load Degree of soil Programme phases
3)
All All
• Prewash
1)
This programme offers the most efficient use of water and energy consumption for crockery and cutlery with
normal soil. This is the standard programme for test institutes. This programme is used to assess compliance with
the Ecodesign Comission Regulation (EU) 2019/2022. This programme is used to assess compliance with the UK
Ecodesign for Energy-Related Products and Energy Information Regulations.
2)
Automatic door opening during the drying phase. Refer to "Settings".
3)
With this programme, you can quickly rinse off food remains from dishes and prevent odours forming in the ap‐
pliance. Do not use detergent with this programme.
6.1 Consumption values
Programme
1)2)
Water
(l)
Energy
(kWh)
Duration
(min)
9.9 0.936 227
11.1 - 13.6 1.052 - 1.285 160
9.6 - 11.7 0.886 - 1.083 90
9.2 - 11.2 0.556 - 0.680 30
3.4 - 4.2 0.012 - 0.015 15
1)
The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of
dishes and the degree of soil can change the values.
2)
The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for conducting performance tests (e.g. according to:
EN60436 /BS EN60436 ), send an email to:
info.test@dishwasher-production.com
In your request, include the product number code (PNC) from the rating plate.
For any other questions regarding your dishwasher, refer to the service book provided with
your appliance.
7. SETTINGS
7.1 Programme selection mode and
user mode
When the appliance is in programme
selection mode, you can set a programme
and enter user mode.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• Activation or deactivation of the rinse aid
empty notification.
• Activation or deactivation of the acoustic
signal for the end of a programme.
• Activation or deactivation of the AirDry.
ENGLISH 9
To Next Page
Loading...
