What should I do if the AEG Oven system cannot connect with the control panel (F908)?
If your AEG Oven displays error F908, indicating that the oven system cannot connect with the control panel, turn the oven off and on.
Why is my AEG BHS9800CM cleaning performance not satisfactory?
If the cleaning performance of your AEG Oven is not satisfactory, it might be because you started cleaning when the oven was too hot. Wait until the oven is cold and then repeat the cleaning process. Also, make sure you have removed all accessories from the oven before cleaning, and repeat the cleaning.
Why is there too much water on the bottom of the AEG Oven cavity after cleaning?
If there's too much water on the bottom of the AEG Oven cavity after cleaning, it's likely because you put too much detergent in the oven before you started cleaning. Next time, evenly spread a thin layer of detergent on the cavity walls.
Why is there no water inside the grill or roasting pan of my AEG BHS9800CM after descaling?
If there is no water inside the grill or roasting pan after descaling your AEG Oven, it means that the water drawer was not filled to the maximum level. Check if a descaling agent or water is present in the water drawer body.
Why is there dirty water on the bottom of the AEG BHS9800CM Oven cavity after descaling?
If there is dirty water on the bottom of the cavity after descaling your AEG Oven, the grill or roasting pan is likely on the wrong shelf position. Remove the remaining water and descaling agent from the bottom of the oven. Next time, put the grill or roasting pan on the first shelf position.
How to replace the top lamp in my AEG BHS9800CM Oven?
To replace the top lamp in your AEG Oven: 1. Turn the glass cover to remove it. 2. Remove the metal ring and clean the glass cover. 3. Replace the lamp with a suitable 300 °C heat-resistant lamp. 4. Attach the metal ring to the glass cover and install it.
How to fix AEG BHS9800CM Oven error F144 - the sensor in the Water drawer cannot measure the water level?
If your AEG Oven displays error F144, indicating that the sensor in the water drawer cannot measure the water level, empty the water drawer and refill it.
Why does water come out of the water drawer of my AEG Oven?
If water comes out of the water drawer of your AEG Oven, it's probably because you did not assemble the lid of the water drawer or wave breaker correctly. Reassemble the lid of the water drawer and wave breaker.
What to do if my AEG BHS9800CM displays F602 or F603 error related to Wi-Fi?
If your AEG Oven displays error codes F602 or F603, indicating that Wi-Fi is not available, turn the oven off and on.
What to do if AEG Oven displays F604 error after the first Wi-Fi connection failed?
If your AEG Oven shows error F604 after the first Wi-Fi connection failed, turn the oven off and on, then try again.
General| Oven size | Large |
|---|---|
| Number of ovens | 1 |
| Voltage | 220 - 240 V |
| Frequency | 50/60 Hz |
| Installation Type | Built-in |
| Cooling Fan | Yes |
| Child Lock | Yes |
| Timer | Yes |
| Self-Cleaning | Yes |
| Pyrolytic Cleaning | Yes |
| Total oven(s) interior capacity | 71 L |
| Width | 595 mm |
| Product Type | Built-in |
| Depth | 567 mm |
| Height | 594 mm |
| Dimensions (H x W x D) | 594 x 595 x 567 mm |
To Next Page
