What to do if my AEG Oven does not turn on or heat up?
If your AEG Oven isn't turning on or heating up, there are several potential causes. First, verify that the oven is properly connected to the electrical supply. Also, make sure the clock is set. Ensure the oven door is fully closed. Check the fuse, and if it's blown, replace it. If the issue continues, contact a qualified electrician. Lastly, check if the Child Lock is activated.
What to do if AEG Oven displays F604 error after the first Wi-Fi connection failed?
If your AEG Oven shows error F604 after the first Wi-Fi connection failed, turn the oven off and on, then try again.
What does error F111 mean on my AEG BHS9800CM Oven?
Error F111 on your AEG Oven indicates that the food sensor is not correctly inserted into the socket. Fully plug the food sensor into the socket.
What to do if I have trouble with the wireless network signal on my AEG BHS9800CM Oven?
If you're experiencing trouble with the wireless network signal on your AEG Oven, check your wireless network and router and try restarting the router.
What to do if AEG BHS9800CM Oven displays error F601 related to Wi-Fi signal?
If your AEG Oven displays error code F601, it indicates a problem with the Wi-Fi signal. Check your network connection.
Why is the water drawer of my AEG BHS9800CM Oven difficult to clean?
If the water drawer of your AEG Oven is difficult to clean, it may be because the lid and the wave breaker were not removed. Remove the lid and the wave breaker.
Why is there dirty water on the bottom of the AEG BHS9800CM Oven cavity after descaling?
If there is dirty water on the bottom of the cavity after descaling your AEG Oven, the grill or roasting pan is likely on the wrong shelf position. Remove the remaining water and descaling agent from the bottom of the oven. Next time, put the grill or roasting pan on the first shelf position.
Why is there no water inside the grill or roasting pan of my AEG BHS9800CM after descaling?
If there is no water inside the grill or roasting pan after descaling your AEG Oven, it means that the water drawer was not filled to the maximum level. Check if a descaling agent or water is present in the water drawer body.
Why is there too much water on the bottom of the AEG Oven cavity after cleaning?
If there's too much water on the bottom of the AEG Oven cavity after cleaning, it's likely because you put too much detergent in the oven before you started cleaning. Next time, evenly spread a thin layer of detergent on the cavity walls.
Why is my AEG BHS9800CM cleaning performance not satisfactory?
If the cleaning performance of your AEG Oven is not satisfactory, it might be because you started cleaning when the oven was too hot. Wait until the oven is cold and then repeat the cleaning process. Also, make sure you have removed all accessories from the oven before cleaning, and repeat the cleaning.
General| Oven size | Large |
|---|---|
| Number of ovens | 1 |
| Voltage | 220 - 240 V |
| Frequency | 50/60 Hz |
| Installation Type | Built-in |
| Cooling Fan | Yes |
| Child Lock | Yes |
| Timer | Yes |
| Self-Cleaning | Yes |
| Pyrolytic Cleaning | Yes |
| Total oven(s) interior capacity | 71 L |
| Width | 595 mm |
| Product Type | Built-in |
| Depth | 567 mm |
| Height | 594 mm |
| Dimensions (H x W x D) | 594 x 595 x 567 mm |
To Next Page
