The lamp may automatically
deactivate at a temperature
below 60 °C during some
oven functions.
5.4 Activating the BakingPlus
function
This function allows to have an
improvement of humidity during the
cooking.
WARNING!
Risk of burns and damage to
the appliance.
Released humidity can cause burns:
• Open the appliance door with care
after the BakingPlus operation.
Refer to “Hints and tips”
chapter.
1. Open the oven door.
2. Fill the cavity embossment with tap
water.
The maximum capacity of the cavity
embossment is 250 ml.
CAUTION!
Fill the cavity
embossment with water
only when the oven is
cold.
3. Put food in the appliance and close
the oven door.
4. Set the BakingPlus function: .
5. Turn the knob for the temperature to
select a temperature.
CAUTION!
Do not refill the cavity
embossment with water
during cooking or when
the oven is hot.
6. To deactivate the appliance, turn the
knobs for the oven functions and
temperature to the off position.
7. Remove water from the cavity
embossment.
WARNING!
Make sure that the
appliance is cool before
you remove the
remaining water from
the cavity embossment.
5.5 Display
To Next Page
Loading...
