11.3 How to use: Pyrolytic cleaning
Clean the oven with pyrolytic cleaning.
WARNING!
There is a risk of burns.
CAUTION!
If there are other appliances installed in the same cabinet, do not use them at the same
time as this function. It can cause damage to the oven.
Before the pyrolytic cleaning:
Turn off the oven and wait
until it is cold.
Remove all accessories. Clean the oven floor and the in‐
ner door glass with warm water,
a soft cloth and a mild detergent.
Do not fill the water tank during cleaning. It restarts the cleaning cycle.
Step 1 Turn on the oven.
Step 2 Select: Menu / Cleaning.
Step 3 Put the baking tray on the first shelf position to collect water from the water tank.
Press the knob to start water tank emptying.
Step 4 When the tank emptying ends remove the baking tray and removable shelf supports.
Wipe the oven cavity and the inner door glass with a soft cloth. Press the knob to con‐
tinue cleaning.
Step 5 Select the cleaning mode. Press the knob to confirm.
Option Cleaning mode Duration
Pyrolytic cleaning, quick Light cleaning 1 h
Pyrolytic cleaning, normal Normal cleaning 1 h 30 min
Pyrolytic cleaning, intense Thorough cleaning 3 h
When the cleaning starts, the lamp is off and the cooling fan works at a higher speed.
- press to stop the cleaning before it is completed.
Do not use the oven until the door lock symbol disappears from the display.
39/60
CARE AND CLEANING
To Next Page
