AEG BSS 4808 - Advanced Media Features; Bluetooth Pairing and Audio Streaming

English
50
CD in MP3 format:
“READING” briefly appears on the display. The number
of folders (F) and the titles will then appear briefly. The
playback starts from the first track and from the first
folder. The current folder (e.g. 01), the current song (e.g.
005), and the elapsed playing time will be shown in the
display. Use the FOLDER+ or FOLDER- buttons (14/16/14)
to select the individual folders.
5. To remove a CD press the STOP button (7/9), open the
CD compartment and carefully take out the CD.
Always keep the CD door closed.
NOTE:
• WhenplayingCDinMP3formatcontainingfolders,the
display will show 001 for the first track of the new folder
when switching to another folder.
• Ifadiscisnotproperlyornotatallinserted,“READING”
will light up and the display will show “NO DISC”.
• PlaybackofCDscreatedbytheusercannotbeguar-
anteed due to the variety of available software and CD
media equipments.
Playing back music via Bluetooth
Cordless via Bluetooth
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
canbecausedforexamplebyWLAN-networks,DABradios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enableddevice.Thefunctionalradiusislimitedtoapprox.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To remotely control the source, the playback device has to
support the AVRCP profile (Audio Video Remote Control
Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
player (e.g. mobile phone). For this, refer to the operation
manual of your player.
2. Press the FUNCTION button (19 on the device) repeat-
edly, until “BT” is shown on the display. Alternatively, you
can also press the AUX/BT button (3 on the remote).
3. Chose the Bluetooth menu in your player and register
the device in your player. For this, refer to the operation
manual of your player. The device “BSS 4808” will show
in your player as a selection.
NOTE:
Only one player can be connected to the device. If
the device is already connected to another player, the
device will not appear in the BT selection menu.
4. Now enter the password “0000” in your player, depend-
ing on the device manufacturers, model, and software
version.
Pay attention to the indicators on your player to check
whether the devices are successfully connected to each other.
For operation, please refer to the section “Description of the
Operating Buttons”.
Ifpossible,adjustthevolumeoftheexternalunittoacom-
fortable level.
NOTE:
• Dependingonthedevicemanufacturer,youneedto
perform the registration (PAIRING) again to connect the
devices.
• Incaseofproblemsduringrepairingofaplayback
device, deactivate the WiFi-/ and mobile data function
in your playback device.
• TheBluetoothcompatibilitycannotbeensuredfor
devices (e.g. mobile phones) getting released in the
future.
• Toensureanoptimalconnection,makesurethatthe
battery of your player is completely charged.
• Someofthemobilephonebrandshaveanenergy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• Tobeabletotransferaudiodata,Bluetoothneedsto
stay activated in your player Observe the operation
manual of your player.
• Ifamobilephoneonwhichyouareplayingmusicre-
ceives a call, the music will be interrupted. The sound is
played back by the speaker depending on the mobile
phone. To transfer the conversation to your mobile tele-
phone, please refer to the popup on the mobile phone
display. After you have terminated the phone call, the
devices will be connected to each other again. You may
have to restart playback.