AEG BSS 4808 - Program Playback

English
51
Description of the Operating Buttons
PLAY/PAUSE (8/11)
You may temporarily stop playback and start again. The
elapsed playing time will flash on the display. Pressing the
button again will continue playback from the same position.
/ SKIP/TUNING UP/DOWN (9/8)
During playback:
With the
buttonyoumayskiptothenextornextbutone
track, etc. Press and hold this button to quickly search music
(sound will be muted).
You may operate the
button as followed:
Press1x= Startscurrenttrackagainfromthebeginning.
Press2x= Skipsbacktoprevioustrack.
Press3x= Playstrackpriortothat,etc.Pressandhold
this button to quickly search music (sound will
be muted).
During radio mode:
Tune the desired radio station.
STOP (7/9)
The CD or the songstops.
During FM radio mode:
Switch between STEREO and MONO.
MUTE (15/15)
Quickly turn off the sound. “MUTE” will flash in the display.
To cancel this function, press MUTE again.
EQ (18/7)
(Preset equalizer function). There are different sound modes
available (CLASSIC, ROCK, POP, JAZZ, FLAT).
REPEAT/INTRO (6/13)
Press1x: (REPEATlightsup)Thecurrenttrackwillbe
repeated entirely.
Press2x: (REPEATALLlightsup)ThecompleteCDwill
be repeated entirely.
Press3x: (INTROlightsup)EachtitleoftheCDwillbe
played for 10 seconds.
Press4x: Allfunctionswillbecanceled.Normalplay-
back will be continued.
Only for CDs in MP3 format:
Press1x: Thecurrenttrackwillberepeatedcontinu-
ously (The display will show REPEAT).
Press2x: TheselectedfolderoftheMP3CDwillbe
repeated continuously (the display will show
REPEAT ALBUM). Use FOLDER+/- buttons
(14/16/14) to select the individual folders.
Press3x: TheentireCDwillberepeatedcontinuously
(REPEAT ALL is displayed).
Press4x: EachtitleoftheCDwillbeplayedfor10sec-
onds each (INTRO will appear on the display).
Press5x: ThefunctionwillbedeactivatedandtheCD
will be played in normal mode.
RANDOM (12 on the remote)
The display will show “RANDOM” and the number of the
track that will be played first. All tracks will be played con-
secutively in random order.
FOLDER +/- (14/16/14)
CD in MP3 format:
Press these buttons during playback to switch one folder up
or down. The display shortly shows a message, e.g. ALBUM
02, Then the system automatically starts play-back of the MP3
CD. When pressing the buttons during stop mode, the mes-
sage will also shortly be shown in the display. Then press
PLAY/PAUSE to start playback.
PRESET (5 on the remote)
During radio mode:
Select a stored radio station.
ID3 (6 on the remote)
In case of a CD or file in the MP3 format:
Press the button to turn on the function. “ID3 ON” will show
in the display for a short time. In case of a stored ID-3 Tag in-
formation it will show up in the display as a continuing band.
Press the button again to deactivate the function. “ID3 OFF”
will show in the display for a short time.
PROG (10/4)
To save the stations and to set the programmed playback.
Program Playback
Program playback in desired sequence. (Only in CD/USB/SD
mode)
1. Press
STOP button (7/9).
2. Press PROG button (10/4). The display will show “- - - -
PR:01” (“track” PR: “memory position”) and MEMORY.
Use the / buttons (9/8) to select the desired track and
press PROG buttons again. The display will change to
memory position P02.
3. Use the / buttonstoselectthenexttrackandpress
PROG again. Repeat the steps until you have selected all
tracks.
NOTE:
If the memory capacity of the programmable title is
reached, “FULL” will be displayed.
4. Press the
PLAY/PAUSE button (8/11). Playback starts.
The display will show the first selected track number.
5. Press
STOP button once to stop playback. The memory
will be kept.