Step 1 Turn off the oven and wait un‐
til it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side
wall and remove it.
Step 4 Install the shelf supports in
the opposite sequence.
11.3 How to use: Catalytic
cleaning
The cavity is coated with catalytic
enamel. It absorbs fat during catalysis.
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
Clean one oven at a time.
Before the catalytic cleaning
Turn off the oven and wait
until it is cold.
Remove all accessories and
removable shelf supports.
Clean the oven floor and the
inner door glass with warm
water, soft cloth and mild de‐
tergent.
Clean the oven with catalytic cleaning
Step 1 Step 2 Step 3 Step 4
To clean the top oven
set the function: .
To clean the main oven
set the function: .
Set the maximum
oven temperature.
Duration: 1 h
After cleaning, turn
the knob for the
oven functions to
the off position.
When the oven is
cold, clean the cav‐
ity with a wet soft
cloth.
11.4 How to remove and
install: Door
You can remove the door and the
internal glass panels to clean it. The
number of glass panels is different for
different models.
WARNING!
The door is heavy.
CAUTION!
Carefully handle the glass,
especially around the edges
of the front panel. The glass
can break.
www.aeg.com24
To Next Page
Loading...
