AEG DCB331010M - Display Functions; Before First Use; Initial Operation Guide

To set the time.
4.3 Display
The display works only with
the main oven.
A B
A. Clock functions
B. Timer
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Before first use
The oven can emit an odour and smoke during preheating. Make sure that the room is
ventilated.
Preheat both ovens. Heat up one oven at a time.
Step 1 Step 2
Step 3
Set the clock Clean the oven Preheat the empty oven
1. , - press to set the
time. After approximately
5 sec., the flashing stops
and the display shows
the time.
1. Remove all accessories
and removable shelf
supports from the oven.
2. Clean the oven and the
accessories with a soft
cloth, warm water and a
mild detergent.
1. Set the maximum tem‐
perature for the function:
.
Time: 1 h.
2. Set the maximum tem‐
perature for the function:
.
Time: 15 min.
3. Set the maximum tem‐
perature for the function:
.
Time: 15 min.
Turn off the oven and wait until it is cold. Place the accessories and the removable shelf
supports in the oven.
www.aeg.com8