The function does not stop the timer
functions.
Touch to activate the function.
comes on. The heat setting is lowered
to 1.
To deactivate the function, touch
. The
previous heat setting comes on.
If you change the heat
setting, the function stops
and the display shows the
new heat setting.
5.8 Lock
You can lock the sensors on the hob
while cooking zones operate.
Set the heat setting first.
To activate the function: touch .
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch
.
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.
5.9 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: the hob must
be deactivated. Touch for 4 seconds
until flashes. Touch . comes on
for 4 seconds.
To deactivate the function: the hob
must be deactivated. Touch for 4
seconds until flashes. Touch .
comes on for 4 seconds.
To override the function for only one
cooking time: activate a cooking zone.
comes on. Touch for 4 seconds
until comes on for all zones. Set the
heat setting in 4 seconds. You can
operate the hob. When you deactivate
the appliance the function operates
again.
5.10 OffSound Control
(Deactivation and activation
of the sounds)
Deactivate the hob. Touch for 3
seconds. Touch for 3 seconds. or
comes on. Touch of the timer to
choose one of the following:
• - the sounds are off
•
- the sounds are on.
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to you can
hear the sounds only when:
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control
panel.
5.11 Power management
• All cooking zones are connected to
one phase. See the illustration.
• The phase has a maximum electricity
loading of 3700 W.
• The function divides the power
between cooking zones.
• The function activates when the total
electricity loading of the cooking
zones exceeds 3700 W.
• The function decreases the power to
the other cooking zones.
• The heat setting display of the
reduced zones alternates between the
chosen heat setting and the reduced
heat setting. After some time the heat
setting display of the reduced zones
stays on the reduced heat setting.
www.aeg.com12