7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function Application
Time of Day
To show or change the time of day. You can change
the time of day only when the oven is off.
Duration
To set the length of cooking. Use only when a heating
function is set.
End Time
To set the oven turn-off time. Use only when a heating
function is set.
Time Delay
Combination of functions: Duration, End Time.
Minute Minder
To set a countdown time. This function has no effect on
the operation of the oven.
Minute Minder - can be set at any time, also if the oven
is off.
7.2 How to set: Time of day
After the first connection to the mains,
wait until the display shows: hr, 12:00.
12 - flashes.
Step 1 Turn the knob for the temperature to set the hour.
Step 2
- press to confirm.
The display shows the set hour and: min. 00 - flashes.
Step 3 Turn the knob for the temperature to set the minutes.
Step 4
- press to confirm.
The display shows the set time.
- press repeatedly to change the time of day. - flashes in the display.
7.3 How to set function:
Duration
Step 1 Set a heating function.
Step 2
- press repeatedly. - starts to flash.
Step 3
Turn the control knob to set the minutes. - press to confirm.
ENGLISH 13
To Next Page
Loading...
Need help?
General