EasyManua.ls Logo

AEG HGX75400SM - User Manual

AEG HGX75400SM
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
aeg.com/register
HGX75400SM
EN User Manual | Hob
aeg.com\register

Table of Contents

Questions and Answers

  • D
    David SimpsonAug 11, 2025
    Why is there no spark when I try to activate the spark generator on my AEG HGX75400SM?
    • N
      nhowardAug 11, 2025
      If there's no spark when you try to activate the spark generator on your AEG Hob, start by checking if the hob is correctly connected to the electrical supply. Then, verify the fuse hasn't blown; if it repeatedly blows, consult a qualified electrician. Ensure the burner cap and crown are correctly placed. If these steps don't resolve the issue, make sure that the thermocouple is heated up sufficiently by keeping the knob pushed for 10 seconds or less after lighting the flame. Finally, check that the injector isn't blocked and the burner crown is clean.
  • C
    Courtney MillerAug 20, 2025
    What to do if the flame extinguishes immediately after ignition on my AEG Hob?
    • J
      Joe WashingtonAug 20, 2025
      If the AEG Hob's flame extinguishes immediately after ignition, several factors could be at play. First, ensure the hob is correctly connected to the electrical supply. Secondly, make sure the burner cap and crown are properly placed. Also, the thermocouple might not be sufficiently heated; try keeping the knob pushed for about 10 seconds after lighting the flame. Lastly, verify that the injector isn't blocked and the burner crown is clean.
  • E
    Elizabeth RoachAug 29, 2025
    Why is the flame ring uneven on my AEG Hob?
    • R
      Rodney AndersonAug 29, 2025
      If the flame ring on your AEG Hob is uneven, it's likely that the burner crown is blocked with food residues.

AEG HGX75400SM Specifications

General IconGeneral
BrandAEG
ModelHGX75400SM
CategoryHob
LanguageEnglish

Related product manuals