Use the sensor fields to operate the appliance. The displays, indicators and sounds
tell which functions operate.
Sen‐
sor
field
Function Comment
1
ON / OFF To activate and deactivate the hob.
2
Hob²Hood To activate and deactivate the manual mode
of the function.
3
Pause To activate and deactivate the function.
4
/
- To increase or decrease the time.
5
- To set the timer function.
6
- Timer display To show the time in minutes.
7
- Control bar To set a heat setting.
8
PowerBoost To activate the function.
9
Lock / Child Safety Device To lock / unlock the control panel.
5.3 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ / There is a risk of
burns from residual heat.
The indicators show the
level of the residual heat for
the cooking zones you are
currently using. The
indicators may also come on
for the neighbouring cooking
zones even if you are not
using them.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat
of the cookware.
When the hob is deactivated, the
indicators are still visible. When the hob
is cold enough, they disappear.
6. DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Activating and
deactivating
Touch for 1 second to activate or
deactivate the hob.
The control bars come on after you
activate the hob and go off after you
deactivate the hob.
When the hob is deactivated you can
only see .
6.2 Automatic Switch Off
The function deactivates the hob
automatically if:
ENGLISH 9
To Next Page
Loading...
