To Next PageTo Next Page
Need help?Do you have a question about the AEG MB 1.0 and is the answer not in the manual?
General| Battery technology | Lead-Acid |
|---|---|
| Input voltage | 220-240 V AC |
| Output voltage | 12V DC |
| Charging current (max) | 1.0A |
| Charging Time | Varies depending on battery capacity |
| Protection Features | Short-circuit protection, Reverse polarity protection |
Details hazards related to battery acid and necessary precautions to avoid skin and eye damage.
Outlines risks of explosion and fire during charging due to gasses and vapors, and necessary safety measures.
Explains the risks of electric shock from the device, including improper use, wet conditions, and damaged cables.
Warns against charging incorrect batteries and advises on preventing device damage from battery gasses or drops.
Emphasizes the importance of reading the manual and safety notices before operating the device.
Step-by-step instructions for connecting the battery pulser to the battery and power outlet.
Cautionary advice regarding pole reversal and short circuits before initiating the training cycle.
Describes the automatic detection of battery status and the charging/discharge cycles during training.
Instructions for safely disconnecting the battery pulser from the battery and power outlet.
Details the diagnosis, bulk, absorption, and monitoring phases of battery charging.
Lists built-in safety features such as short circuit, incorrect connection, and overcharging protection.
Provides contact information for questions regarding commissioning, operation, or problems.
Guides on how to dispose of packaging and the device in an environmentally friendly manner.
