19
INTRODUCTION
The following pictograms are used in these instructions and / or on the packaging:
Follow instructions when using the machine.
Risk of bodily or fatal injury to children!
Follow warnings and safety instructions!
Only use this device at weatherproof locations!
Dispose of packaging and the unit in an environmentally friendly manner!
Symbol/Signalword Possible consequences of non-observance
Danger!
Immediate danger to life or serious injuries
Warning!
Serious injuries, potentially life-threatening
Caution!
Light to moderate injuries
Attention! Risk of property damage
Note:
This operating manual also refers to the battery pulser as device.
Normal use
This device is suitable for maintaining the battery performance and the battery condition
of rechargeable 12 V lead-acid batteries (including maintenance-free (MF) 12 V lead-
acid batteries). This device preserves the functionality of the battery through controlled
charging and discharge cycles.
This device is not intended for use by children or persons with limited mental capacity
or lacking experience and/or lacking expertise. Children should be supervised to ensure
they do not play with the device.
This device is not intended for commercial use.
Any other use or modification of the device is considered improper and involves signifi-
cant risks. The manufacturer assumes no liability for damages due to improper use.
Contents
Be sure to verify contents immediately upon opening the product. Check the product and
all parts for damage. Do not use a defective product or parts.
▪
Microprocessor Battery Pulser MB 1.0
▪
Clamp terminal connection cable
▪
Ring terminal connection cable
▪
Instructions for use
Please include all relevant documentation to other users!
Technical data
Item number 97175
Max. Charging current 1000 mA
Battery 12 V
Supply voltage 230 V DC / 50 - 60 Hz
Recommended battery capacity
for maintenance
up to 100 Ah
Type of batteries lead-acid batteries (WET, MF, AGM and GEL)
To Next Page
Loading...
