EasyManua.ls Logo

AEG MB 1.0 - Troubleshooting                                                 27

AEG MB 1.0
84 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
27
TROUBLESHOOTING
Error/Problem Possible cause Correction
red LED lights up
(longer than 3
seconds)
Defective battery
Battery voltage below 1.5 V
The battery voltage is less than
11 V after 4 minutes.
The battery voltage is less than
12 V after 2 minutes.
Replace battery.
The battery pulser was unable to
fully restore a charge within 86
hours.
Replace battery.
Terminal connection cable connec-
ted incorrectly
Unplug the battery
pulser and check the
connections.
red LED doesn’t
light up.
No power supply, battery pulser
not plugged in.
Verify the battery
pulser is plugged
into a 230V power
outlet.
Unplug the battery pulser and
check the connections.
Unplug the battery
pulser and check the
connections.
Defective battery
Battery voltage below 0.5 V
Replace battery.
Low temperatures (below 0 ˚C).
Explosion hazard!
Never charge frozen batteries.
Charge battery in
normal conditions.

Table of Contents

Related product manuals