To Next PageTo Next PageWhat to do if my AEG Water Heater won't start?
If your AEG Water Heater isn't starting, there could be several reasons. First, check the fuses or MCBs in your fuse box to ensure the appliance is getting power. Another possible cause is a scaled or dirty aerator in the tap; try cleaning or descaling it, or replace it if necessary. Finally, the water supply might be interrupted; in this case, vent the appliance and the cold water inlet line.
General| Brand | AEG |
|---|---|
| Model | MTH 350 |
| Category | Water Heater |
| Language | English |
Details the unit's function, output, and brief operational tips.
Covers critical warnings about heat, pressure, and initial steps for malfunctions.
Advises on unit care and the importance of keeping instructions for future use.
Outlines unit components, available models, and a general overview.
Covers critical warnings, fitting requirements, and relevant regulations for installation.
Provides detailed unit specifications and guidance on selecting an appropriate installation location.
Step-by-step guide for unit installation and proper electrical hookup.
Details the initial activation process and lists optional accessories for the unit.
Guides users on common faults like no hot water and their potential causes.
Details troubleshooting steps for installers, covering weak flow and heating issues.
