EasyManua.ls Logo

AEG BS 45 E - User Manual

AEG BS 45 E
12 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SHOWER
WATER HEATER
MODEL BS 35 / 45 / 60
BS 35 E / 45 E / 60 E
OPERATION AND
INSTALLATION INSTRUCTIONS

Table of Contents

Questions and Answers

  • A
    Amanda BennettAug 6, 2025
    Why is my AEG Water Heater not working when electricity supply and flow are available?
    • G
      Gloria GrahamAug 6, 2025
      If your AEG Water Heater isn't working despite having electricity and water flow, it could be due to a few reasons. First, the water flow might not be sufficient to activate the unit. Try cleaning the filter after shutting off the cold water intake. Another possibility is a blocked filter in the cold water connection pipe. In this case, you should increase the mains pressure. Also, insufficient water pressure can cause this issue.
  • S
    schneiderrebeccaAug 22, 2025
    What to do if the “ELSD” Light is on in my AEG BS 45 E Water Heater?
    • G
      Gary KingAug 22, 2025
      If the “ELSD” light is illuminated on your AEG Water Heater, it means the safety device has been activated. To resolve this, press the “Reset” button.

Summary

Installation Instructions

Fixing Method

Mounting Dimensions

Electrical Connection

Outlines the requirements and procedure for safe electrical connection.

Important Information

Crucial notes regarding pressure, venting, and ELSD testing.

Technical Data

Operating Instructions

Regulations and Provisions

Essential regulations and safety provisions to be observed during operation.

Important Note

Installation Location

Specifies the correct and safe location for installing the shower unit.

Installing the Unit

Step-by-step guide for the physical installation process of the unit.

First Operation

Procedures for the initial startup and testing of the unit by a qualified installer.

Service Note

Trouble-shooting

No Hot Water Despite Flow Volume Setting

Addresses the issue of no hot water when flow is set to maximum.

Unit Not Working with Available Supply

ELSD Light On

AEG BS 45 E Specifications

General IconGeneral
BrandAEG
ModelBS 45 E
CategoryWater Heater
LanguageEnglish

Related product manuals