EasyManua.ls Logo

AEG BS 35 E - User Manual

AEG BS 35 E
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SHOWER
WATER HEATER
MODEL BS 35 / 45 / 60
BS 35 E / 45 E / 60 E
OPERATION AND
INSTALLATION INSTRUCTIONS

Questions and Answers

  • B
    Beth BrownAug 7, 2025
    Why is my AEG BS 35 E Water Heater not working when electricity supply and flow are available?
    • M
      Mariah BallAug 7, 2025
      If your AEG Water Heater isn't working despite having electricity and water flow, it could be due to a few reasons. First, the water flow might not be sufficient to activate the unit. Try cleaning the filter after shutting off the cold water intake. Another possibility is a blocked filter in the cold water connection pipe. In this case, you should increase the mains pressure. Also, insufficient water pressure can cause this issue.
  • B
    burgesslauraAug 21, 2025
    What to do if the “ELSD” Light is on in my AEG BS 35 E?
    • D
      Deborah GarzaAug 21, 2025
      If the “ELSD” light is illuminated on your AEG Water Heater, it means the safety device has been activated. To resolve this, press the “Reset” button.

Summary

Installation Instructions

Electrical Connection

Details earthing requirement and cable bushing use for water protection.

Wiring Diagram

Presents electrical schematic and component identification.

Important Information and ELSD Test

Highlights crucial points regarding unit pressure, maintenance, and ELSD testing.

Operating Instructions

Installing the Unit

Step-by-step guide for physically installing the water heater and connecting components.

First Operation

Procedure for initial startup, emphasizing qualified installer execution.

Guarantee and Trouble-shooting

Trouble-shooting

Lists common faults, their causes, and recommended solutions.

AEG BS 35 E Specifications

General IconGeneral
BrandAEG
ModelBS 35 E
CategoryWater Heater
LanguageEnglish

Related product manuals