15
• Connect Phase to pin 1, Neutral to Pin 2 and PE to Pin
• Assemble the socket again and attach.
• Twist the coupling ring to the PV-Inverters receptacle. Make sure it is
correctly matched.
To prevent risk of electric shock, ensure that PE is properly
grounded before operating the PV-Inverter.
4. Suggested wire-cross section or AC wire
MODEL DIAMETER Ø
(MM)
AREA (MM
2
) AWG NO.
Protect PV 2000
1,29 1,5 16
Protect PV 2800
1,63 2,0 14
To Next Page
Loading...
