AEG Protect PV 2000 User Manual

11
3. INSTALLATION INSTRUCTIONS
OPENING THE PACKAGE
After opening the package, please check the contents of the box. It
should contain the following:
1. One Protect PV inverter
2. Instruction manual
3. One mounting frame
4. 4 mounting screws
5. 2 safety-lock screws
6. One AC socket assembly for Protect PV 2000 and 2800
BEFORE INSTALLATION
Before starting installation please consider the following items:
This unit is designed for indoor usage. Do not expose the unit to
wet, or moist conditions.
Do not expose the PV-Inverter to direct sunlight. Direct sunlight increa-
ses the internal temperature that may reduce conversion efficiency.
• Check the ambient temperature of installation is within specied
range of -20 ~ +55 °C.
• The AC grid voltage is between 196 and 253VAC, 50/60Hz.
• Electric utility company has approved the grid connection.
• Qualied personnel are performing the installation.
• Adequate convection space surrounds the inverter.
• Inverter is being installed away from explosive vapors.
• No ammable items are near the inverter.
Protect PV can be installed and operated at locations where the am-
bient temperature is up to 55°C. However, for optimal operation, it is
recommended that Protect PV is installed where the ambient tempera-
ture is between 0~40°C.

AEG Protect PV 2000 Specifications

General

Brand	AEG
Model	Protect PV 2000
Category	Inverter
Language	English