26 www.aeg.com
12.1 Getting through narrow
spaces
If refrigerator will not t through an
entrance area, doors can be removed.
Check rst by measuring the entrance.
To prepare for removing the
doors:
1. Make sure the electrical power cord
is unplugged from the wall outlet.
2. Remove any food from the door
shelves and close the doors.
To remove the refrigerator
doors:
1. Open doors to 90°.
2. Remove all ve Phillips screws from
top hinge cover and lift up.
3KLOOLSV6FUHZ
7RS
+LQJH
&RYHU
3. Trace lightly around the door’s top
hinges with a pencil. This makes
reinstallation easier.
12. DOOR REMOVAL INSTRUCTIONS
To make nal door height adjustments:
1. Open freezer drawer to make lower
hinge visible.
2. Insert 6mm Allen wrench into the
shaft of the lower hinge.
3. Adjust the height by turning clockwise
or counterclockwise. Turning
clockwise will lower the door. Turning
counterclockwise will raise the door.
Default setting is to the lowest height.
5DLVH
11.6 Flipper Mullion
Adjust Flipper Mullion for proper
connection with the mullion guide by
ensuring the ipper mullion is folded
and perpendicular to the fresh food door.
If the mullion guide is not in the correct
position, it could prevent the door from
closing completely.
To Next Page
Loading...
