AEG RMB954F9VX - Page 28

28 www.aeg.com
NOTE
When reinserting the water tube
and replacing the top hinge
cover, use care to be sure the
tube does not kink.
Once both doors are in place, ensure
they are aligned with each other and
level (Please see the Installation section
for more details), and replace the top
hinge cover.
12.2 To remove the
MultiSwitch/MultiChill
drawer
1. Fully open drawer.
2. Remove basket from drawer.
3. Unclip harness at front of drawer
and move harness out of the way
of drawer slides.
4. Press liner clips and slide rail past
clips on both sides to fully remove
drawer from cabinet.
5. Reverse the steps to reinstall
the drawer.
3UHVVWKH
WZRWDEVRQ
ERWKVLGHV
WRUHOHDVH
WKHVOLGHUV
8QFOLS
+DUQHVV
12.3 Removing Freezer Drawer
CAUTION
Drawer is heavy. Use caution
when lifting.
1. Open drawer and fully extend.
2. Remove the freezer drawer.
3. Remove the freezer basket.
4. Inside the cabinet, press the two tabs
on both sides to release the sliders.
5. Remove the drawer with brackets
and sliders.
3UHVVWKHWZRWDEV
RQERWKVLGHVWR
UHOHDVHWKHVOLGHUV
)UHH]HU
'UDZHU
)UHH]HU
%DVNHW
12.4 Re-installing Freezer
Drawer
1. Place drawer with brackets and
sliders inside the cabinet and click
into place.
2. Replace the basket.
NOTE
For additional instructions,
see Storage Features section.