The relation between the heat setting / fan
speed setting and the time after which the
appliance deactivates:
Heat setting The hob deactivates
after
1 - 2 6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hours
Fan speed setting The hood deacti‐
vates after
10 hours
7.2 Pause
This function sets all operating cooking zones
to the lowest heat setting. The speed of the
hood fan decreases to 1. When you activate
the function while the hood operates in the
automatic mode, the speed of the hood fan
will not be reduced.
When the function operates, and can
be used. All other symbols on the control
panels are locked.
The function does not stop the timer
functions.
1. To activate the function: press .
The heat setting is lowered to 1. The speed of
the hood fan decreases to 1.
2. To deactivate the function: press .
The previous heat setting / fan speed setting
appears.
7.3 Lock
You can lock the control panel while the hob
operates. It prevents an accidental change of
the heat setting / fan speed setting.
Set the heat setting / fan speed setting first.
To activate the function: press .
To deactivate the function: press again.
The function deactivates as you
deactivate the hob.
7.4 Child Safety Device
This function prevents an accidental
operation of the hob and the hood.
To activate the function: press . Do not
set any heat setting / hood setting. Press and
hold for 3 seconds, until the indicator
above the symbol appears. Deactivate the
hob with
.
The function stays active when you
deactivate the hob. The indicator above
is on.
To deactivate the function: press . Do
not set any heat setting / hood setting. Press
and hold for 3 seconds, until the indicator
above the symbol disappears. Deactivate the
hob with
.
Cooking with the function activated: press
, then press for 3 seconds, until the
indicator above the symbol disappears. You
can operate the hob. When you deactivate
the hob with the function operates again.
7.5 Bridge
The function operates when the pot
covers the centres of the two zones. For
more information on the correct
placement of cookware refer to "Using
the cooking zones".
This function connects two left side cooking
zones and they operate as one.
First set the heat setting for one of the left
side cooking zones.
To activate the function: touch
. To set or
change the heat setting touch one of the
control sensors.
18 ENGLISH
To Next Page
Loading...
