8
5.3 Base station (see P3)
# Meaning
13
Page
Press to page all the registered handsets.
5.4 Text and Digit Entry
In editing mode, a cursor is displayed to indicate the current text entry
position. It is positioned at the right of the last character entered.
Writing Tips:
tOnce a character is selected, the cursor will move to the next position
after a short pause.
tYou can move the cursor within the text with the
/ keys to amend
the text entry.
tPress “CLEAR“ to delete the last character.
tPress and hold “CLEAR“ to delete the entire text string.
6 INSTALLATION
6.1 Connecting the base station (see p4)
tPlug the power supply and line cord into the base station.
tPlug the power adapter into a 110-230 Vac, 50/60Hz mains socket and
the line cord into your telephone line socket.
tRoute the power adaptor and telephone line cords throught the
corresponding slots on the back of the telephone base.
tAlways use the cables provided in the box.
Warning:
>Use only the provided adaptor, using other power supplies may cause
a hazard or damage the phone.
>Install the base unit in a position where the mains adapter plug will
reach an easily accessible mains socket to unplug in case needed.
Never try to lengthen the mains power cable.
To Next Page
Loading...
