EasyManua.ls Logo

AEG Voxtel D570 - Telephone Operation

AEG Voxtel D570
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
UK
Note:
The base unit needs mains power for normal operation, not just for
charging the handset batteries.
6.2 Installing and charging the batteries (see P2)
tPlace the 2 supplied batteries into the battery compartment with the
polarity markings as shown. Use only the NiMH rechargeable battery
type provided with the telephone.
tPosition the battery compartment cover over the batteries and slide up
to click into place.
tPut the handset on the base and charge for 24 hours before using the
handset for the first time.
>The handset will give a beep when it is properly placed on the base
or charger.
7 TELEPHONE OPERATION
7.1 Make a call
7.1.1 Preparatory dialling
tEnter the phone number and press
or to connect to the line and
dial the number.
>When entering the number, if you make a mistake, press “CLEAR“ to
delete digits.
7.1.2 Direct dialling
tPress
or to connect to the line and then enter the phone number.
7.1.3 Call from the phonebook
tPress
to access the phonebook and press / to select the desired
phonebook entry.
tPress
or to dial out the selected phonebook entry.
Note:
You can also access the phonebook by pressing “MENU“, OK.
Note:
The alphanumeric keys provide a short-cut to find entries beginning with
the corresponding letters.

Related product manuals