+ -
12 24V
12
APPLICATION EXAMPLE
BASIC WIRINGS OF A STAND ALONE DOOR LOCK
NOTE:
Connect the 1N4004 as close as possible to the lock in parallel with the lock power terminals to absorb the back
EMF to prevent it from damaging the keypad. The 1N4004 is not required if the electric lock is AC operated.
To avoid Electro-Static-Discharge from interfering with the operation of the keypad, always ground the ( )
terminal of the keypad to earth.
-
EG
IN
OUTPUT 1
N.C. C. N.O.
ELECTRIC LOCK
N.C. N.O.
OR
12 24V
AC / DC
POWER
SUPPLY
-
CATHODE
EGRESS BUTTON
(INSIDE THE HOUSE)
MORE EGRESS
BUTTONS CAN
BE CONNECTED
IN PARALLEL
AD-1312
OR AP-960
AD-2312
1N4004
N.O.
N.O.
OUTPUT RELAY
N.O. Output for Fail-secure Lock
N.C. Output for Fail-safe Lock
DK-9520
40IN9520
M-100705
R
SINCE 1979
ADVANCED ELECTRONICS
INDUSTRY
MANUFACTURED BY:
An Innovative Product
Developed By:
SELF-CONTAINED
DIGITAL ACCESS CONTROL KEYPAD
DK-9520
Programming & Installation Manual
FOR ELECTRIC LOCK INSTALLATION
AEI PROTECT - ON
SYSTEMS LIMITED
To Next Page
Need help?
General
