AEM 30-3351 - User Manual

ADVANCED ENGINE MANAGEMENT INC.
2205 126
th
Street Unit A, Hawthorne, CA. 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aemelectronics.com
Instruction Part Number: 10-3350 Rev A
 2013 Advanced Engine Management, Inc
Page 1
Multi-Input Water/Methanol
Injection Kit
P/N 30-3350, 30-3351, 30-3352
This product is legal in California for racing vehicles only and should never be used
upon a highway. This product is legal solely for vehicles used in competition which
may never be used upon a public road or highway
WARNING:
!
Improper installation and/or adjustment of this product can result in
major engine/vehicle damage! Use of this injection system requires
proper tuning! Use this system with EXTREME caution! If you are
uncomfortable with anything about this, please refer the installation to
an AEM trained tuning shop or call 800-423-0046 for technical
assistance. You should also visit the AEM Performance Electronics
Forum at http://www.aempower.com
NOTE: AEM holds no responsibility for any engine damage that
results from the misuse of this product!

Summary

Installation Diagram for Injection System

Installation Checklist

Pump and Tank Installation Guide

Controller Installation Procedure

Progressive Controller Installation

External Signal Input Overview

External MAP 0-5 V Installation

Injector Duty Installation

0-5 V MAF Installation

Frequency MAF Installation

Nozzle Selection and Assembly

Nozzle Mounting Guidelines

Pump and System Check

System Error Codes

Troubleshooting Flowchart

Controller Settings

Mode Selection

Instructions on how to select the correct operating mode via DIP switches.

Controller Features

Controller Optional Features and Tuning

Boost-Safe Output

Guidance on using the Boost-Safe output for engine protection.

Engine Tuning Advice

Recommendations for tuning the engine when using water/methanol injection.

Methanol Safety Precautions

AEM 30-3351 Specifications

General

Brand	AEM
Model	30-3351
Category	Controller
Language	English