To Next PageTo Next Page
Need help?Do you have a question about the AEM 30-4100 and is the answer not in the manual?
General| Brand | AEM |
|---|---|
| Model | 30-4100 |
| Category | Controller |
| Language | English |
Details the 52mm digital readout, sweeping LED display, and 0-5V analog output capabilities.
Explains the limitations of narrow band sensors and the advantages of UEGO technology for performance.
Introduces the Bosch LSU4.2 sensor and its current pump technology for precise AFR measurements.
Highlights the sensor's individual calibration resistor for accuracy.
Details the RED, BLACK, WHITE, and BLUE wire connections to the UEGO Gauge for power and outputs.
Provides pin locations for connecting the WHITE analog output to various AEM EMS models.
Presents a table of AFR values for calibrating analog inputs in AEM EMS for different fuels.
Instructions for connecting the WHITE analog output to non-AEM EFI systems.
Details serial output connection, HyperTerminal setup, and required settings for data logging.
Advises on routing the sensor connector through tight spaces and installing it via conduit or firewall.
Specifies the minimum 10° upward angle for sensor installation to prevent liquid accumulation.
Explains how to change the gauge's output calibration settings (PO-P4) for different needs.
Describes the rotary switch positions (PO-P4) on the gauge for selecting calibration outputs.
Lists key specifications for the gauge and sensor, including operational limits and performance.
Provides crucial notes on sensor care, operation, and potential damage or shortened lifespan.
Details the warranty period, coverage, exclusions, and claim process for the AEM product.
