AEM 30-4350 - User Manual

ADVANCED ENGINE MANAGEMENT INC.
2205 126
th
Street Unit A, Hawthorne, CA. 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aempower.com
Instruction Part Number: 10-4350 Rev 090506
© 2006 Advanced Engine Management, Inc.
Page 1
Installation Instructions for
AEM Tru Boost
WARNING:
30-4350
Boost Controller Gauge
This installation is not fo the electrically or mechanically
challenged! Use th EXTREME
r
is gauge with
,!
caution! If you are
t
uncomfortable with anything about this, please refer the
installation to an AEM trained tuning shop or call 800-423-0046
for technical assistance. You should also visit the AEM
Performance Electronics Forum at http://www.aempower.com
NOTE: AEM holds no responsibility for any engine damage tha
esults from the misuse of this product! r
y and should
never be used on public highways.
This product is legal in California for racing vehicles onl

Summary

AEM Tru Boost Installation Guide

Gauge Installation

Connection Diagram

Provides a visual guide for connecting the boost solenoid and gauge wiring.

Optional Connections

Scramble Boost Connection

Details grounding the orange wire via a switch to activate scramble boost.

Boost Solenoid Plumbing

Tru Boost Configuration Options

Scramble Boost Settings

Configure scramble boost duty cycle (10-90%) and duration (0-25.5s).

Alarm and Boost Settings

Alarm Activation Setting

Sets the boost pressure threshold for alarm activation.

Tru Boost Operating Modes

Scramble Boost Operation

Alarm and Over-Boost Indicators

Describes LED flashing patterns for alarm and over-boost conditions.

Changing Gauge Configuration

AEM 30-4350 Specifications

General

Type	Boost Controller
Compatibility	Universal
Valve Included	Yes
Input Voltage	12V DC
Protection	Overcurrent
Operating Temperature	-40°C to 85°C