AEM 30-3350 User Manual

ADVANCED ENGINE MANAGEMENT INC.
2205 126
th
Street Unit A, Hawthorne, CA. 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aemelectronics.com
Instruction Part Number: 10-3350 Rev A
 2013 Advanced Engine Management, Inc
Page 1
Multi-Input Water/Methanol
Injection Kit
P/N 30-3350, 30-3351, 30-3352
This product is legal in California for racing vehicles only and should never be used
upon a highway. This product is legal solely for vehicles used in competition which
may never be used upon a public road or highway
WARNING:
!
Improper installation and/or adjustment of this product can result in
major engine/vehicle damage! Use of this injection system requires
proper tuning! Use this system with EXTREME caution! If you are
uncomfortable with anything about this, please refer the installation to
an AEM trained tuning shop or call 800-423-0046 for technical
assistance. You should also visit the AEM Performance Electronics
Forum at http://www.aempower.com
NOTE: AEM holds no responsibility for any engine damage that
results from the misuse of this product!

AEM 30-3350 Specifications

General

Type	Boost Controller
Input Voltage	10-16V DC
Output Channels	1
Data Logging	No
Dimensions	6.5" x 4.5" x 1.5"
Valve Included	Yes
Output Current	2A
Protection Features	Short circuit protection
Operating Temperature	-40°C to 85°C

Summary

AEM Water/Methanol Injection Kit Introduction

Important Safety Warnings

Crucial warnings regarding installation and use of the injection system for safety.

Installation Diagram

Installation Checklist

Pump and Tank Installation Guide

Controller Installation Guide

Controller Wiring and Connections

External Input Mode Configuration

External Input Mode Selection

Explains dip switch settings for various external input modes.

Nozzle Mounting and System Checks

Nozzle Mounting Guidelines

Pump and System Test

Fluid Compatibility Information

Crucial information regarding approved fluids and restrictions on fuel types.

System Error Codes

Troubleshooting Diagram

Advanced Features and Engine Tuning

Engine Tuning for Performance

Guidance on how to tune the engine to maximize gains from water/methanol injection.

Safety, Cold Weather, and Maintenance

Methanol Safety Notice

Essential safety warnings and recommendations regarding the use and handling of methanol.