Page 2
EM’s Tru Boost boost controller gauge is a stand-alone boost controller that features a
ree digit LED digital readout with 24 sweeping multi color LED’s, two programming
uttons, and an on-board pressure sensor. The Tru Boost kit contains all necessary
uge assembly
(1) Appearance kit (Silver bezel, silver pin guide, white faceplate)
connector, 6 pieces)
NPT fitting
itting
Figure1. Kit Components
A
th
b
components, including an AEM high performance boost control solenoid, to install and
use the Tru Boost.
Contents: See Figure 1.
(1) Tru Boost Ga
(1) Installation kit (Butt
(1) Tru Boost cable
(1) Boost solenoid
(1) Instruction manual
(1) Boost hose 10’
(1) 1/8” barb to 1/8”
(1) Sintered Muffler
(2) –6 to 1/8” NPT f
(2) 3/16” barb to 1/8” NPT fitting
To Next Page
Loading...
