AEM INFINITY ECU - Page 25

RevC 07/15/13 Page 25
Table Edit Hot Keys
The following table lists the default hot keys in InfinityTuner. These can be edited by the
user. See the full user manual for details.
Key
Function
“=”
Increase value of current cell(s) by 1%
“-“
Decrease value of current cell(s) by 1%
“CTRL + =”
Increase value of current cell(s) by 10%
“CTRL + -”
Decrease value of current cell(s) by 10%
“SHIFT + =”
Increase value of current cell(s) by 5%
“SHIFT + -”
Decrease value of current cell(s) by 5%
“u”
Add 1 to current cell value
“d”
Subtract 1 from current cell value
“CTRL + u”
Add 10 to current cell value
“CTRL + d”
Subtract 10 from current cell value
“CTRL + 0”
Smoothing using four neighboring cells (left, right, bottom, top)
“CTRL + 1”
Smoothing using eight neighboring cells
“h”
Simple interpolation fill in x (horizontal) direction for 2D tables
“v”
Simple interpolation fill in y (vertical) direction for 2D tables
“x”
Simple interpolation fill in x (horizontal) direction for 1D tables
“c”
Two-way interpolation fill using only the selection area corners
“e”
Two-way interpolation fill using the selection edges
Infinity: Plot Data and Controls Synchronization
AEM supplied layout files will come pre-loaded with several “Plot Control” windows