AEM INFINITY ECU User Manual

This product is legal in California for racing vehicles only and should never be
used on public highways.
WARNING:
!
This installation is not for the electronic novice or the PC illiterate!
Use this system with EXTREME caution! If you are not well versed in
electronics and vehicle instrumentation or are not PC literate, please
do not attempt the installation. Refer the installation to an AEM
trained tuning shop. A list of AEM trained tuning shops is available
at www.aemelectronics.com/dealer_locator.php or by calling 800-
423-0046. You should also visit the AEM Performance Electronics
Forum at http://www.aemelectronics.com.
NOTE: AEM holds no responsibility for any engine damage that
results from the misuse of this product!
NOTE: All supplied AEM calibrations, Wizards and other tuning
information are offered as potential starting points only. IT IS THE
RESPONSIBILITY OF THE ENGINE TUNER TO ULTIMATELY
CONFIRM IF THE CALIBRATION IS SAFE FOR ITS INTENDED USE.
AEM holds no responsibility for any engine damage that results from
the misuse or mistuning of this product!
AEM Performance Electronics
2205 126
th
Street Unit A, Hawthorne, CA. 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aemelectronics.com
Instruction Part Number: 10-7100
 2013 AEM Performance Electronics
INFINITY
Quick Start Guide

AEM INFINITY ECU Specifications

General

Brand	AEM
Model	INFINITY ECU
Category	Automobile Accessories
Language	English

Summary

InfinityTuner Software Installation

Software Installation Steps

Describes the process of installing the InfinityTuner software.

Device Driver Installation

Details on installing the necessary USB drivers for the ECU.

AEM Infinity Account Registration

Creating Your User Account

Steps to create a new account on the AEM Infinity website.

Account Confirmation Process

Email Confirmation Steps

Steps to confirm the email address for the new account.

Infinity ECU Product Registration

Initiating Product Registration

How to start the process of adding your ECU.

Entering Serial and Security Codes

Providing product identification details.

Product Registration Details

Entering User and Vehicle Information

Firmware and Configuration Updates

Downloading Update Files

How to obtain the necessary firmware and configuration files.

Saving Configuration Files

Saving the .pakgrp File

Infinity ECU Firmware Upgrade

Connecting InfinityTuner to ECU

Initiating Firmware Upgrade Process

Beginning the firmware upgrade utility.

InfinityTuner Calibration Data

Connecting and Saving Session Files

Procedures for connecting to the ECU and saving tuning sessions.

InfinityTuner Setup Wizard

Basic Setup Configuration

Ignition Sync Setup Procedure

Ensuring accurate ignition timing synchronization.

Advanced Setup Wizard Options

Injector Setup and Flow Configuration

Infinity Table Edits and Hot Keys

Table Selection and Math Function Edits

Infinity Air and Fuel Calculation

Volumetric Efficiency (VE) Table

Tuning Air-Fuel Ratio Targets

Lambda and AFR Target Table Tuning

Infinity Installation Requirements

Pre-installation Check List

Essential checks before installing the ECU.

Wiring Options and Accessories

Idle Air Control Valve (IACV) Modification

IACV Modification Steps

Detailed instructions for modifying the IACV.

IACV Modification Details

Terminal Removal and Insulation

Reinstalling the IACV Connector