Keep the enclosure in a controlled indoor environment, away from moisture, temperature
extremes, flammable liquids and gasses, conductive contaminants, dust, and direct sunlight.
Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not
block, cover or insert objects into the external ventilation openings of the enclosure.
The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt
to unpack, move or install it unassisted. Use a mechanical device such as a forklift or pallet
jack to move the enclosure in the shipping container. Inspect the shipping container and the
enclosure for shipping damage. Do not use the enclosure if it is damaged. Leave the
enclosure in the shipping container until it has been moved as close to the final installation
location as possible.
Use caution when cutting packing materials. The enclosure may be scratched, causing
damage not covered by the warranty. Save all packing materials for later use. Repacking and
shipping the enclosure without the original packing materials may cause product damage
that will void the warranty.
Install the enclosure in a structurally sound area capable of handling the load, or on a level
floor that is able to bear the weight of the enclosure, all equipment that will be installed in
the enclosure and any other enclosures and/or equipment that will be installed nearby. For
permanent wall mounting, be sure to securely fasten the enclosure to the building structure
before operation. Do not place any object on the enclosure, especially containers of liquid,
and do not attempt to stack the enclosures.
Our enclosures include quick-release doors and side panels for convenient maintenance.
Front access doors are reversible for installation flexibility. Front door and side panels are
lockable. An optional rolling caster kit (optional for 15U-22U) is available for easy
maneuvering of enclosures.
To Next Page
Loading...