Install Casters (Optional for 15 - 22U Cabinets):
Secure Casters to the Bottom Panel
○
J of the cabinet with M5.5 Self-Tapping
Screws
○
C .
Wall Mounting the Enclosure:
Mount the Enclosure using keyhole cutouts on the frame of the enclosure.
Note: Enclosure must be installed by a qualified technician. Before mounting, use a
level and tape measure to position your mounting area precisely. Use appropriate
fasteners (not included) to secure the enclosure to the wall. A minimum of four
fasteners and appropriately sized fender washers is recommended.
To Next Page
Loading...