Aeotec WallMote - User Manual

29/10/2019 Aeotec Wallmote user guide : Aeotec Group
https://aeotec.freshdesk.com/support/solutions/articles/6000176572-wallmote-user-guide- 1/9
WallMote user guide.
Modified on: Thu, 14 Mar, 2019 at 4:18 PM
Aeotec WallMote.
Aeotec Wallmote has been crafted to control connected lighting using Z-Wave Plus (http://aeotec.com/z-wave-plus). It is
powered by Aeotec’s Gen5 (http://aeotec.com/z-wave-gen5) technology. You can find out more about Wallmote
(http://aeotec.com/z-wave-wireless-switch)by following that link.
To see whether Wallmote is known to be compatible with your Z-Wave system or not, please reference our Z-Wave
gateway comparison (http://aeotec.com/z-wave-gateways) listing. The technical specifications of Wallmote
(https://aeotec.freshdesk.com/solution/articles/6000176570-wallmote-technical-specification-) can be viewed at that link.
Familiarize yourself with your WallMote.
1. WallMote
2. Back-Mount plate
3. Double-sided tape
4. Micro USB cable

Summary

Safety and Quick Start

Important Safety Information

Crucial safety advice and warnings for using the WallMote to prevent hazards.

Installing your WallMote

Guides on physically mounting the WallMote and adding it to a Z-Wave network.

Z-Wave Network Integration

Adding WallMote to Z-Wave Network

Steps for pairing the WallMote with a Z-Wave network, including LED feedback.

Attach to Back Mounting Plate

Instructions for physically connecting the WallMote unit to its mounting plate.

Advanced Parameter Configurations

Battery and System Operations

Testing Health Connectivity

Resetting WallMote

Steps to factory reset the WallMote, removing it from the network.

Aeotec WallMote Specifications