NORM (TECH) Surface Main
(no dive yet, Nitrox)
Press any button to activate.
Once 10 minutes elapse, while on the suface prior to a dive, operation enters
Power Saver Mode (PSM) until a button is pressed to resume operation.
Surface Sequence:
MAIN >> ALT 1 > ALT 2 > ALT 3 > FLY/DESAT > LOG > SET > HIST > ID.
• Press & release - to step, or hold
to scroll, through the Surface
Sequence.
• In Settings - increases value.
• Press & release - to step back
through the Surface Sequence.
• In Settings - decreases value.
• From Surface Sequence or in
Settings, hold (2 sec), or no
button action (2 min) - reverts to
Surface Main.
• From Surface Main, press &
release, or hold - for Backlight.
• In Surface Sequence - selects
item.
• In Settings - saves value.
• From Surface Sequence or
Settings, hold (2 sec) - to step
back to a previous item.
A
S
M
A
M
S
<< WARNING >>
You must read and understand the Operating Manual (on the enclosed
CD) and the Dive Computer Safety and Reference Manual (booklet
enclosed) before diving with this product.
To Next Page
