Need help?Do you have a question about the Aeris Elite T3 and is the answer not in the manual?
Details the function and use of the Elite T3's control buttons for navigation and selection.
Explains the hierarchy and primary modes: NORM, GAUG, and FREE, of the Elite T3 dive computer.
Describes the audible alarm system, its activation conditions, and sounds.
Explains how to activate and the function of the SmartGlo backlight feature.
Covers the power source, battery type, and how to check the battery status.
Details the Nitrogen Loading Bar Graph (NIBG) and Oxygen Bar Graph (O2BG) displays.
Explains the function and display of the Variable Ascent Rate Indicator.
An overview of the symbols, icons, and alpha-numeric displays used on the Elite T3.
Details on Tank Pressure, Depth, Air Time, Date/Time/Temp, and Free Dive displays.
Details on the primary operating modes: NORM, GAUG, and FREE, and the Surface Mode.
Describes the NORM Surf Main display, its information content, and button operations.
Information on how to check the Elite T3's battery status.
Information on checking the transmitter link status and battery level.
Configuration of FO2 settings for GAS 1, GAS 2, GAS 3, and default values.
Setup for various alarms including Audible, Depth, EDT, NIBG, Pressure, and PO2 alarms.
Configuration options for utilities like Wet Activation, Units, Safety Stop, Backlight, and Sampling Rate.
Settings for Hour Format, Time, and Date to configure the dive computer's internal clock.
Details on using Norm Plan Mode and the Pre-Dive Planning Sequence (PDPS) for dive preparation.
Information on the Fly, Saturation (SAT), and Time to Desaturate modes for post-dive calculations.
How to access and view dive data logs for NORM and GAUG modes, including log data and preview.
Explains the History Mode for NORM and GAUG dives, covering History 1 and History 2 screens.
A comprehensive guide to understanding the various symbols and icons shown on the Elite T3 display.
General introduction to the information presented for different dive modes.
Information on transmitter link interruptions, positioning, and signal reception areas.
Explanation of Dive Time Remaining (DTR), No Decompression (NDC), Oxygen Accumulation (OTR), and Air Time Remaining (ATR).
Details on Ascent Rate Alarms and how to control the display settings.
Explains the function of the Wet Contacts for automatic dive mode activation.
Detailed explanation of the Norm No Decompression Dive Mode, including main and alternate displays.
Covers Decompression Dive Mode, Safety Stops, and various Violation Modes (Conditional, Delayed, Immediate).
Specifics on Conditional, Delayed, and Immediate Violation Modes, including Violation Gauge.
Instructions on using the Elite T3 as a digital depth gauge without nitrogen/oxygen calculations.
Information on conditions triggering High PO2 warnings and High Oxygen Accumulation.
A consolidated list of common warnings and alarm messages encountered in NORM and GAUG modes.
Procedures for switching between GAS 1, GAS 2, and GAS 3 during NORM dives.
Instructions on how to perform a Buddy Pressure Check using the Elite T3.
Details on the Surface Mode after a dive and the 10-minute transition period.
Information on accessing other modes after the transition period concludes.
Explains how to use the Elite T3 in Gauge Mode and its main/alternate display screens.
Introduction to the Free Dive Mode, its capabilities, and specific alarms.
Configuration and operation of alarms (EDT, Depth) and settings specific to Free Dive Mode.
Procedures for connecting to a PC to upload settings and download dive data.
Instructions for maintaining the Elite T3, including cleaning, inspections, and obtaining service.
Step-by-step guide for replacing the Elite T3 and transmitter batteries correctly.
Procedures for testing the Elite T3 system and inspecting components for proper function.
Guidance on installing transmitters and their compatibility with Nitrox mixtures.
Information on altitude sensing, adjustment, and oxygen exposure limits based on NOAA tables.
Detailed specifications for the Elite T3 computer, including modes, performance, and settings.
Covers operational aspects like dive counting, altitude, power, activation, and environmental limits.
A log to record service performed by an Authorized AERIS Dealer, including date and technician.
General| Operating Modes | Air, Nitrox, Gauge |
|---|---|
| Display Type | LCD |
| Number of Buttons | 4 |
| Logbook Capacity | 24 dives |
| Air Integration | No |
| Compass | No |
| Wireless Connectivity | No |
| Depth Rating | 100 meters |
To Next Page
