Need help?Do you have a question about the Aeris F11 and is the answer not in the manual?
Details how the device functions as a dive gauge.
Connecting the F11 to a PC or Mac for data transfer.
Details the battery type, voltage, and low battery indications.
Main time display and access to other watch functions.
Primary display for Surface Mode, showing dive info and CDT.
Countdown timer for Free Mode operations.
Sets alert for elapsed surface recovery time.
Configures alarms for time intervals during dives.
Configures alarms for depth intervals during dives.
Sets depth alarms for descent/ascent.
Sets the depth to activate dive mode.
Sets the interval for repetitive dive detection.
Shows dive profile with depth and time changes.
Primary display during a dive.
Displays chronograph status during a dive.
Alerts for low battery conditions.
Alarm for Surface Recovery Time elapsing.
Alerts for low battery conditions in Free Mode.
Alarm for Repeating Time Interval elapsing during a dive.
Alarm for Repeating Depth Interval elapsing during a dive.
Alarms triggered at set depths during dives.
Connecting to PC/Mac for data transfer and settings management.
General| Operating Modes | Air, Nitrox, Gauge |
|---|---|
| Display Type | LCD |
| User Replaceable Battery | Yes |
| Number of Buttons | 2 |
| Display | Digital |
| Compass | No |
| Water Temperature Sensor | Yes |
| Backlight | Yes |
| Nitrox Compatibility | Yes |
| Depth Rating | 100 meters |
To Next Page
