Need help?Do you have a question about the Aeris Epic and is the answer not in the manual?
Details the general features and display elements of the Aeris Epic dive computer.
Explains the four control buttons (M, S, L, A) and their functions for operating the dive computer.
Describes the three selectable Dive Computer Operating Modes: NORM, GAUG, and FREE.
Details how to connect the Aeris Epic to a PC for data upload and download using the interface cable.
Explains the function and situations that activate the audible alarm and the red LED warning light.
Describes how to activate the backlight and its duration settings.
Outlines the power source (Lithium Battery) and its expected life and operation.
Explains setting the current time at your home location as the Local Default Time.
Details the information displayed on the Main Time screen, including icons and data.
Guides on setting the Date and Time, which serves as the basis for Alternate Time values.
Describes setting and interchanging Alternate Time based on hour differential for travel locations.
Explains how to set the time difference for the Alternate Time feature.
Details the operation of the countdown timer, including setting and background running.
Explains the functions of the Chronograph, including lap timing and recall.
Guides on setting and managing the Daily Alarm feature.
Describes the function of the Bar Graph for Nitrogen Loading (NIBG) and Oxygen Accumulation (O2BG).
Explains the use of symbols and alphanumeric graphics for various dive data.
Details how to view ambient temperature on the dive computer.
Overview of the three main Dive Computer modes: NORM, GAUG, and FREE.
Describes how the dive computer operates in Surface Mode and transitions to Dive Mode.
Explains how to check the battery status of the EPIC dive computer.
Details how to check the status and battery level of connected transmitters.
Describes the alternate display screen in Norm Surf mode.
Guides on setting the FO2 (Fraction of Oxygen) for Nitrox dives across multiple gas mixes.
Details how to set various alarms, including Audible Alarm, Depth Alarm, and NIBG Alarm.
Explains how to configure the depth alarm settings.
Details how to set the PO2 (Partial Pressure of Oxygen) alarm.
Covers utility settings such as Wet Activation, Units of Measure, and Safety Stop.
Explains how to configure the Wet Activation feature for automatic dive mode entry.
Guides on configuring the Safety Stop feature, including duration and depth.
Details how to adjust the conservative factor for decompression calculations.
Explains how to access and use the Plan Mode for dive planning.
Describes the Fly Mode, a countdown timer for post-dive activities.
Details the Saturation (SAT) Mode for calculating tissue desaturation time.
Explains how to access and view dive logs from the NORM/GAUG modes.
Describes the History Mode for viewing accumulated dive data.
Explains what happens when the transmitter link is interrupted during a dive.
Details the display of Dive Time Remaining, including No Deco, O2, or Air Time.
Explains how the No Decompression Limit is calculated and displayed.
Describes the calculation and display of Air Time Remaining.
Explains the warnings and alarms associated with ascent rate.
Details how to navigate between different display screens using the buttons.
Explains the Wet Contact feature for automatic dive mode activation.
Details the operation and displays within the NORM No Decompression Dive Mode.
Describes the safety stop procedure and display in NORM No Deco mode.
Explains the main display screen when in Decompression Dive Mode.
Details the warnings and messages for conditional violations during a dive.
Explains the different levels of delayed violations and their indications.
Describes the warning and alarm for high PO2 levels during a dive.
Explains the indication of high oxygen accumulation and its limits.
Guides on manually switching between gas mixes (GAS 1, 2, 3) in NORM dives.
Shows the display information for previewing Gas 1 settings before switching.
Shows the display information for previewing Gas 2 settings before switching.
Shows the display information for previewing Gas 3 settings before switching.
Explains how to perform a Buddy Pressure Check with transmitters in NORM dives.
Describes the Gauge Mode as a digital depth gauge/timer without nitrogen calculations.
Details the information shown on the main display screen in GAUG Surface Mode.
Explains the alternate display screen available in GAUG Dive Mode.
Details the operation of the Free Dive Mode, including its settings and calculations.
Describes the information presented on the main display screen in FREE Surf Mode.
Explains the Countdown Timer feature in Free Dive Mode, including its status and settings.
Details the setup and function of the Free Dive Elapsed Dive Time (EDT) Alarm.
Explains the three Free Dive Depth Alarms and their configuration.
Summarizes the various alarms specific to Free Dive Mode.
Instructions for connecting to a PC to upload settings and download dive data.
Guidelines on how to properly care for and clean the dive computer.
Recommendations for annual inspections and authorized service.
Provides instructions and precautions for replacing the dive computer and transmitter batteries.
Explains how the dive computer adjusts for altitude and its operational limits.
Lists the range and resolution for various numeric displays on the dive computer.
Details the accuracy, battery life, and operating conditions of the dive computer.
General| Brand | Aeris |
|---|---|
| Model | Epic |
| Category | Diving Instrument |
| Language | English |
To Next Page
