Need help?Do you have a question about the Aeris XR1 and is the answer not in the manual?
Welcome to the XR1 operating guide, emphasizing safety and understanding.
Explains the function of the control button for display selection and information access.
Explains the Nitrogen Bar Graph (NiBG) representing tissue loading and its zones.
Represents tissue loading of nitrogen, showing no decompression or decompression status.
Provides a visual representation of ascent speed, with color-coded segments for rates.
Details various informational displays including Depth, Time, Date, and Temperature.
Displays current depth from 0 to 330 feet, or up to 399 feet in Digital Gauge Mode.
Shows time in hour:minute format, with blinking or solid colon indicating real-time or projections.
Displays dive data in Log Mode; month position depends on Imperial/Metric setting.
Shows ambient temperature, displaying '--' if over 99.
Indicates battery condition with a full or shell/segment icon based on voltage.
Details warning and alarm states, flashing icons, and behavior during dive.
Maximum time at current depth before decompression is needed, calculated from nitrogen absorption.
Manual activation, diagnostic mode, serial number display, and altitude calibration.
Covers the surface display sequence, Surface Mode details, and the Dive Planner function.
Allows configuration of Units, Time, Date, Digital Gauge Mode, and Wet Activation settings.
Covers bar graphs, ascent rate indicators, and display controls within dive modes.
Details the mode entered upon descending to 5 feet, including Main Displays and Safety Stop.
Activates when NDLs are exceeded, requiring controlled ascent and decompression.
Covers Conditional, Delayed, and Immediate Violation Modes, and their display indicators and consequences.
Explains operation as a Digital Depth Gauge/Timer without nitrogen calculations, for advanced diving.
Unit enters Surface Mode upon ascending, starting Surface Interval and a 10-minute Transition Period.
Covers Time to Fly, Time to Desaturate, and Post-Dive Dive Planner functions.
Stores up to 12 dives for viewing, with Preview and Data screens for each dive, and access instructions.
Protects the unit from damage, advises on cleaning with fresh water and avoiding aerosols.
Recommends annual inspection by an Authorized AERIS Dealer to maintain warranty and ensure accuracy.
Details the steps to remove the battery hatch and retaining ring using a screwdriver.
Explains how to remove the battery, O-ring, and retaining bar, with cautions about short-circuiting.
Details inserting the new battery, retaining bar, hatch O-ring, and securing the hatch.
Instructs to activate the unit, check diagnostic, and observe LCD clarity and sharpness after battery replacement.
Lists functions as Air Computer and Digital Depth Gauge/Timer.
Based on Modified Haldanean Algorithm with 12 tissue compartments and Spencer's M values.
Lists surface modes like Activation, Serial Number, Surface, Dive Planner, Set Mode, etc.
Lists dive modes such as No Decompression, Digital Gauge, and Decompression Dive.
Details numeric and special display ranges and their respective resolutions.
Details the Nitrogen Bar Graph zones and Variable Ascent Rate Indicator segment values.
Covers accuracy for Depth and Timers, Dive Counter, and Dive Log Mode capacity.
Covers Altitude operation, Power, Battery Indicator, Activation, Shutoff, and Operating Temperature.
General| Operating Modes | Air, Nitrox, Gauge |
|---|---|
| User Replaceable Battery | Yes |
| Number of Buttons | 2 |
| Connectivity | Bluetooth |
| Logbook Capacity | 24 dives |
| Nitrox Compatibility | Yes |
| Display Type | LCD |
| Depth Rating | 100 meters |
To Next Page
