EasyManua.ls Logo

Aeris Epic - Backlight Functionality; Power Supply and Battery

Aeris Epic
176 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
During the following NORM Dive situations, the 10 second continuous tone will be fol-
lowed by a 5 second steady beep that will not turn off when acknowledged -
Ascending above a required Decompression Ceiling Stop Depth for more than 5
minutes (referred to as a Delayed Violation).
Decompression requires a Ceiling Stop Depth of 70 FT/21 M or deeper.
Being on the Surface for 5 minutes after a Conditional Violation (Permanent
Violation).
BACKLIGHT
To activate the Backlight - press the L button.
The Backlight will activate and illuminate the display for button depression time* plus
the user set Duration time of 0, 5, or 10 seconds, for a maximum of 20 seconds.
(*The Backlight will turn Off if the button is held depressed for more than 10
seconds.)
Press the button again to activate as desired.
NOTE: Extensive use of the Backlight reduces estimated Battery life.
Also, the Backlight does not operate during a Low EPIC Battery Condi-
tion or when the EPIC is connected to a PC.
POWER SUPPLY
The EPIC (Watch) utilizes one 3 volt CR2430 Lithium Battery. When used as a Dive
Computer, the EPIC's battery should operate normally for 1 year or 300 dive hours if 2
dives are conducted during each dive period. The EPIC checks its battery voltage every 2
minutes during surface operation.

Table of Contents

Related product manuals