AERMEC DML 200 User Manual

16
SIZES AND WEIGHTS
B
A
C
D
E
F
Carton box example
Without
packaging
A
(mm)
B
(mm)
C
(mm)
Net
weight
(kg)
DML200 340 250 495 13
With
packaging
D
(mm)
E
(mm)
F
(mm)
Gross
weight
(kg)
DML200 421 303 525 15
MINIMUM TECHNICAL CLEARANCES
≤ 45 cm
≤ 45 cm
CHOOSING THE INSTALLATION AREA
• The unit is intended only for use in indoor residential
environments. Do not use the unit for commercial or
industrial applications.
• It is recommended to position the unit on a smooth
and flat floor.
• The unit will not act as a dehumidifier in closed
adjacent areas, such as in a cabinet near the unit.
• Place the unit in environments with temperatures no
lower than 5 °C and no higher than 35 °C.
• Do not open doors or windows when the unit is
operating. The yield is reduced if doors and windows
are kept open.
• There must be no obstacles near the air discharge
outlets and air suction inlets of the indoor unit, so that
the air can circulate freely.
• Ensure that the installation meets the minimum
technical spaces.
• Do not install the unit near a laundry, bathroom, shower
or swimming pool.
• Limit the room’s exposure to direct sunlight using
blinds or by leaving the windows ajar.

AERMEC DML 200 Specifications

General

Brand	AERMEC
Model	DML 200
Category	Dehumidifier
Language	English