EasyManuals Logo

AERMEC DML 200 User Manual

AERMEC DML 200
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
24
WARNING:
Do not use the unit without a filter, otherwise
the evaporator captures the dust and could
affect unit performance.
Do not dry the filter using open flames or
electric hair dryers, as they could deform or
even ignite the filter.
This equipment is not intended for use by
persons (including children) with reduced
physical or sensory impairment, or lack
of experience and knowledge, unless an
individual is responsible for the supervision
and safety of people above provide them with
the necessary instructions and supervision.
The device should not be used by children as
a game.
Make sure the power supply is within the
tolerance range (+/-10%).
CHECK BEFORE STARTING
Check that the air intake and supply is not blocked
by objects.
Make sure the earthing cable is connected and not
damaged.
Check to make sure the air filter is clean.
Check if the condensate discharge pipe is damaged.
MAINTENANCE AFTER USE
Disconnect the power supply.
Clean the filter and the unit.
Empty the condensate drip tray.
LONG TIMESTORAGE
If the unit will not be used for a long period, follow
the steps described below to keep the unit in a good
condition:
Empty the condensate drip tray.
Clean the unit and protect it against dust.
Wind up the power supply cable, as shown in the
figure.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AERMEC DML 200 and is the answer not in the manual?

AERMEC DML 200 Specifications

General IconGeneral
BrandAERMEC
ModelDML 200
CategoryDehumidifier
LanguageEnglish

Related product manuals