10
ADDING A SPLIT UNIT
AUTOMATIC PAIRING PROCEDURE
1. Select the device you want to select, in our case tap
"Air conditioning”.
WARNING
The automatic registration procedure must be
completed within 2 minutes of resetting the
unit's WiFi module. Restart it again if pairing is
not performed correctly.
2. Select the type of command used to normally
command the unit by tapping it.
Reset the wifi module prior to pairing:
To reset the unit's WiFi module, refer to the specific
procedure indicated in the user manual for the unit's
remote control/wired panel provided together with the
package.
To Next Page
Loading...
