To Next PageTo Next Page
Need help?Do you have a question about the AERMEC FCL 72 and is the answer not in the manual?
Proper handling and packaging instructions during transport.
Explains critical safety icons used in the manual.
Details the standard packaging of the fan coil units.
Lists the different physical dimensions of the fan coils.
Describes available configurations (e.g., valve types).
Lists and illustrates parts for the Module 600.
Lists and illustrates parts for the Module 840.
Description of the heat exchanger specifications.
Explains valve options and fan unit characteristics.
Covers condensate drain and water connections.
Details air filters and GLL grille unit specifics.
Specifies the maximum and minimum operational parameters.
Discusses water temperature effects on unit performance.
Heating capacity and water flow rates for 2-pipe models.
Cooling capacity and water flow rates for 2-pipe models.
Heating capacity and water flow rates for 4-pipe models.
Cooling capacity and water flow rates for 4-pipe models.
Presents cooling capacity figures for FCL32 model.
Explains how to adjust capacity based on speed.
Shows heating capacity curves for various models.
Provides factors to adjust heating yield by speed.
Factors for cooling operation with glycol.
Factors for heating operation with glycol.
Acoustic data expressed in dB for various models/speeds.
Acoustic data expressed in dB(A) for various models/speeds.
Essential accessories for unit operation.
Details electronic and electromechanical panels.
Lists accessories for the VMF system.
Compatibility for valve and resistor accessories.
Compatibility for VMF system and temperature probes.
GLL10/GLL20 models description.
GLL10M model description.
GLL10R/GLL20R models description.
FEL10 filter description and benefits.
FCLMC10/FCLMC20 descriptions and use.
For directing air to adjacent rooms.
For introducing fresh air into rooms.
VHL1/VHL20 for 4-pipe systems.
VHL2/VHL22 for variable flow systems.
RXLE/RXLE20 for heater system.
SIT3/SIT5 for control panel integration.
VMF-SW1 and SW4 probe descriptions.
SW3 and SWA probe descriptions.
Details the wall-mounted VMF thermostat panel.
Describes the main supervision panel for hydronic systems.
Thermostat panel with basic controls.
Thermostat panel with LCD display.
Electromechanical thermostat panel.
Speed selector control panel.
Multifunction electronic thermostat panel.
Speed selector panels for manual control.
Illustrates typical system configurations and connections.
Guidance for installing the unit close to a wall.
Steps for accessing internal components safely.
Procedures for accessing and maintaining the electric box.
Specifications for connecting water pipes.
Procedures for eliminating condensate water.
Describes accessory connections for air intake and flow.
Wiring for standard grille units.
Wiring for other grille unit types.
Explains symbols used in electrical schematics.
Basic wiring for standard grille units.
Wiring for GLL10M units with motorised fins.
Wiring for GLL10R/GLL20R units with infrared receiver.
Wiring diagrams for units with PXAE panel.
Wiring for units using FMT10/FMT20AW panels.
Wiring for units with VMF thermostat.
Wiring for VL version with VMF thermostat.
Wiring for units using SIT interface cards.
Details product certification status.
Company address and contact details.
Proper handling and packaging instructions during transport.
Explains critical safety icons used in the manual.
Details the standard packaging of the fan coil units.
Lists the different physical dimensions of the fan coils.
Describes available configurations (e.g., valve types).
Lists and illustrates parts for the Module 600.
Lists and illustrates parts for the Module 840.
Description of the heat exchanger specifications.
Explains valve options and fan unit characteristics.
Covers condensate drain and water connections.
Details air filters and GLL grille unit specifics.
Specifies the maximum and minimum operational parameters.
Discusses water temperature effects on unit performance.
Heating capacity and water flow rates for 2-pipe models.
Cooling capacity and water flow rates for 2-pipe models.
Heating capacity and water flow rates for 4-pipe models.
Cooling capacity and water flow rates for 4-pipe models.
Presents cooling capacity figures for FCL32 model.
Explains how to adjust capacity based on speed.
Shows heating capacity curves for various models.
Provides factors to adjust heating yield by speed.
Factors for cooling operation with glycol.
Factors for heating operation with glycol.
Acoustic data expressed in dB for various models/speeds.
Acoustic data expressed in dB(A) for various models/speeds.
Essential accessories for unit operation.
Details electronic and electromechanical panels.
Lists accessories for the VMF system.
Compatibility for valve and resistor accessories.
Compatibility for VMF system and temperature probes.
GLL10/GLL20 models description.
GLL10M model description.
GLL10R/GLL20R models description.
FEL10 filter description and benefits.
FCLMC10/FCLMC20 descriptions and use.
For directing air to adjacent rooms.
For introducing fresh air into rooms.
VHL1/VHL20 for 4-pipe systems.
VHL2/VHL22 for variable flow systems.
RXLE/RXLE20 for heater system.
SIT3/SIT5 for control panel integration.
VMF-SW1 and SW4 probe descriptions.
SW3 and SWA probe descriptions.
Details the wall-mounted VMF thermostat panel.
Describes the main supervision panel for hydronic systems.
Thermostat panel with basic controls.
Thermostat panel with LCD display.
Electromechanical thermostat panel.
Speed selector control panel.
Multifunction electronic thermostat panel.
Speed selector panels for manual control.
Illustrates typical system configurations and connections.
Guidance for installing the unit close to a wall.
Steps for accessing internal components safely.
Procedures for accessing and maintaining the electric box.
Specifications for connecting water pipes.
Procedures for eliminating condensate water.
Describes accessory connections for air intake and flow.
Wiring for standard grille units.
Wiring for other grille unit types.
Explains symbols used in electrical schematics.
Basic wiring for standard grille units.
Wiring for GLL10M units with motorised fins.
Wiring for GLL10R/GLL20R units with infrared receiver.
Wiring diagrams for units with PXAE panel.
Wiring for units using FMT10/FMT20AW panels.
Wiring for units with VMF thermostat.
Wiring for VL version with VMF thermostat.
Wiring for units using SIT interface cards.
Details product certification status.
Company address and contact details.
General| Type | Fan Coil Unit |
|---|---|
| Power supply | Electric |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Fins Material | Aluminum |
