To Next PageTo Next Page
Need help?Do you have a question about the AERMEC FCL 32 and is the answer not in the manual?
Crucial safety warnings and operational restrictions for safe use.
Instructions for periodic filter cleaning and unit upkeep.
Recommendations for optimal temperature, air jet, and normal operating sounds.
Steps to take in case of unit malfunction or error.
Details about the standard packaging of the fan coils.
Purpose of the fan coil and its available versions.
Information on the different physical sizes of the FCL units.
How cooling and heating modes are controlled and function.
Explanation of automatic operation and dehumidification requirements.
Details on timer settings, full power, and emergency commands.
Identification of key physical components of the fan coil unit.
General description of the unit and the construction of its base.
Description of mounting brackets and the unit's condensate tray.
Details on the heat exchanger coil and the internal water valve.
Information on the fan unit and the condensate discharge device.
Description of the air filter section and suction/delivery grille units.
Summary of technical data, yield, and performance levels.
Data on pressure drops and correction factors for glycol water.
Tables detailing heating and cooling capacities and water flow.
Information on fan performance, sound levels, and electrical data.
Cooling capacity tables for FCL models 32 through 44.
Cooling capacity tables for FCL models 62 through 72.
Cooling capacity tables for FCL models 82 through 124.
Graphical representation of heating capacity vs. water flow.
Factors to adjust heating capacity based on speed.
Tables showing pressure drop for heating coils at different temperatures.
Tables showing pressure drop for cooling coils at different temperatures.
Correction factors for cooling mode with varying glycol concentrations.
Correction factors for heating mode with varying glycol concentrations.
Sound power levels expressed in dB, across frequencies and globally.
Sound pressure levels measured in the room at different speeds.
Compulsory accessories like grilles and control panels for unit operation.
Accessories for the VMF system, including control panels and interface cards.
Accessories for water valves, electric resistors, and temperature probes.
Descriptions of standard and motorised fin grille units.
Details on grille units with integrated VMF System thermostats.
Details on electrostatic filters and suction flanges.
Information on KFL delivery and KFLD suction flanges.
Descriptions of 3-way, 2-way valves and electric resistors.
SIT interface cards and various temperature probes for system control.
Details on VMF-E4/E4D wall-mounted control panels.
Information on VMF-E5B/E5N supervision interface for system management.
Descriptions of FMT10, FMT20AW, and WMT10 control panels.
Details on PX, PXAE, and PX2/PX2C6 speed selector panels.
Essential safety and compliance instructions before installation.
Diagrams illustrating different system connection examples.
Step-by-step guide for installing the Module 600 unit.
Step-by-step guide for installing the Module 840 unit.
Guidelines for wall installation and unit disassembly for maintenance.
Instructions for connecting water pipes and valves.
Procedures for connecting the condensate drain system.
Connecting to fresh air intake and adjoining room airflow.
Drawings and weight table for Module 600 units.
Drawings and weight table for Module 840 units.
Explanation of symbols and codes used in wiring diagrams.
Wiring diagrams for FCL units with GLL10/GLL20 grilles.
Wiring diagrams for FCL units with VMF system grilles.
Wiring diagrams for FMT10, FMT20AW, WMT10, PXAE panels.
General
