Need help?Do you have a question about the AERMEC fcl and is the answer not in the manual?
Pay attention to 'DANGER' or 'WARNING' signals to prevent damage or injury.
Ensure the apparatus allows for easy maintenance and repair operations.
AERMEC S.p.A. is not responsible for damage due to improper use or incomplete reading.
Detailed breakdown of the infrared remote control's buttons and display elements.
Explanation of symbols for Automatic, Heating, Cooling, and Dehumidification modes.
Explanation of symbols for Turbo, Plasmacluster, Fan Speed, and Transmission/Timer.
Step-by-step guide for replacing batteries in the remote control.
Guidelines for pointing the remote, signal transmission, and distance.
Warnings regarding sunlight, interference, and environmental protection for the remote.
Instructions for using the MODE button to select functions like Auto, Heat, Cool, Dehumidify.
How to adjust the desired temperature using the TEMP. button.
Guide on adjusting fan speed using the FAN button for optimal comfort.
Activating Turbo mode for rapid cooling or heating with high fan speed.
Setting the unit to automatically switch off after one hour.
How to set the unit to automatically switch off within 12 hours.
Procedure to cancel an active timer setting.
How to set the unit to automatically switch on within 12 hours.
Memorization of settings and limitations when using Timer ON/OFF.
Guidelines for directing airflow correctly during cooling and heating operations.
Explanation of auxiliary commands and indicator lights on the unit.
Interpreting indicator lights (LEDs) for unit status and operation modes.
To Next Page
General
