AERMEC GR3 User Manual

11
TIMER OPERATION MODE (available with PGS accessory only)
Image Procedure to be adopted
To access the parameter menu, first press the SET key
and browse through by means of the arrow keys up to the
parameter "Timer".
Press the screwdriver key. At this stage, the writing "ENTER
CODE" will be displayed. The code is the one by default (00
00 00). Just press the screwdriver key for a second time
to confirm.
By acting on the arrows, move to the programming mode
desired. There are three alternatives:
(NONE - DAY -WEEK).
NONE mode:
The programming timer is disabled.
DAY mode:
It is possible to set, along the day, two operation time bands.
- The Daily setting is visualised
- Monday to Sunday settings are not visualised.
WEEK mode:
It is possible, for each day of the week, two operation time
bands.
- Monday to Sunday settings are visualised.
- The Daily setting is not visualised
SET
C1
C2
R
L
R
SETTING
Timer NONE
SET
C1
C2
R
L
R
INSERT CODE
00 00 00
SET
C1
C2
R
L
R
SETTING
Timer NONE
SET IMPOSTATO
Timer NONE
SET IMPOSTATO
Timer DAY
SET IMPOSTATO
Timer WEEK
Once the desired option is selected, con-
firm by pressing the screwdriver key.
N.B. ON/OFF TIMER:
To program the timer, it is necessary
to have access either to the remote
or the local panel.

AERMEC GR3 Specifications

General

Brand	AERMEC
Model	GR3
Category	Chiller Control System
Language	English